Help!Wiring for Peavey Ultra 410!!!

[vladorg]

Hi guys!
I really need help for figuring out how the speakers in Peavey Ultra 410 cabinet should be wired.As you probably know I'm talking about 4 10" speakers.Perhaps the wiring for this amp is similar to any other 4x10" amp cabinet.I'm really confused and any help or suggestions are welcome.Thanks in advance!

[EricV]

Hi there...

Can´t help you with a diagram or something, but Peavey has both a nice customer service ( Go to Peavey.com (http://www.peavey.com) , there are email links to send mail to ) and an amp forum, where you can post your request... either the guys from Peavey or other Peavey customers on that board should be able to help ya out.
Eric

[szulc]

I would bet they are wired series parallel.
Which means two speakers are wired in series then that group of two is wired in parallel with the other two ( wihch are wired in series). If the speakers are 8 ohms, each group of series skeakers will be 16 ohms then the two groups in parallel will be 8 ohms,